View Full Version : 310 dies and 45 schofield
charliek
10-24-2013, 11:25 AM
Here I am at a cabin in the woods with my 310 tool and 45 Colt dies planning to load some 45 Schofield for my USFA 45. But the sizing die won't adjust far enough to size the Schofield cases. Should have checked ahead and brought the Lee hand tool and regular dies. Too bad I was set to use the 310. Plan ahead.
Mk42gunner
10-24-2013, 12:22 PM
Stupid question time. Do you have a die set for the .45 ACP? I think the sizing die would work for the Schofield case.
Robert
Springfield
10-24-2013, 06:53 PM
I bet dies won't crimp the Schofield cases, either.
Larry Gibson
10-25-2013, 05:30 PM
The 310 45 ACP dies will size and crimp the Schofield.
Larry Gibson
Green Frog
10-27-2013, 10:13 PM
What Larry said. Look for the right neck diameter (OD) and a COL equal to or less than your desired round and you should be good to go for straight sided cases.
Froggie
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.