PDA

View Full Version : Reloading press help


sashultz
10-16-2013, 01:47 PM
Do any shooters out there have a Hornady Projector press? I need measurments for the primer tube block so I can make one. Hornady no longer carries them.

thank you
cheese1566
10-17-2013, 08:53 AM
I think I have a loose one. I can try taking it to work and scanning it with a scale.
Send me your email in a PM and I'll try.

May also try posting in the want to buy area. I know a few guys don't prime on these presses and mat have loose parts.
The only weakness now in the older Pro7's and ProJector's are the discontinued primer parts and primer tubes.
cheese1566
10-17-2013, 01:06 PM
84552
Not the best, but the scale will help you draw it out. The pictures were cut and paste, so they lost the 1:1 scale in the conversions.
sashultz
10-27-2013, 01:42 AM
Much appreciated...thanks again!
MGD
10-27-2013, 08:58 AM
Gave up on the priming system on my Projector about 18 years ago. I use a Lee auto prime and just feed it primed brass. Life was a lot better and bloodpressure alot lower. If using a Projector keep an eye on the pin at the bottom of the ram tat hold everthing in. The pin will drft with use and if you don't catch it all the parts in the ram hit the floor.