PDA

View Full Version : cutter heads rcbs pro trim 2


starnbar
10-14-2013, 03:18 PM
Anybody had any luck resharpening the cutter head. thought I would give it a try before I buy a new one
BACKTOSHOOTING
10-14-2013, 09:09 PM
I just picked up a PT2 that to me didn't seam to cut very well and a LAM2 that was missing a couple parts, Called RCBS to order them and they wouldn't take my money.
Call them.
Hardcast416taylor
10-14-2013, 09:14 PM
When mine started to cut a little more slower than when new, about 5 years of use. I asked a friend that worked at a tool&die shop to sharpen the cutter for me. He sent it out to a professional sharpening shop, it came back sharper than when new. So it can be done.Robert
starnbar
10-16-2013, 07:12 AM
That's what I am thinking too thanks hardcast
Calamity Jake
10-17-2013, 10:44 AM
If you don't have the tools to sharpen it yourself then it will cost more to have it sharpened than a new one would cost.
RCBA should send you a new one for the asking.
cheese1566
10-18-2013, 08:45 AM
RCBS makes a carbide cutter head now. I have one, but haven't used it since I am waiting for the first steel one to dull.