View Full Version : How about some load data-30/30 with a 130gr cast boolit?
stocker1042
10-10-2013, 09:09 PM
I ended up with about 300 130gr cast boolits in 30 cal...and I would like to load them for my 30/30. I can't seem to find any super reliable load data outside of about 7 or 8 grains of Unique as a starting point. I'm not against trying that, but I'd like to know if anyone has a pet load for this grain boolit.
Suggestions?
Try 8.5 grs. of Alliant Unique.
I shoot 8.6 grs. of Alliant Unique with a 175 gr. g/c bullet in my T/C , 10" barrel 30-30 all the time.
w30wcf
10-11-2013, 08:37 AM
If the bullets are plain based, I would suggest 6 grs of Unique. You may find that with higher charges some leading may occur ith plain based bullets.
w30wcf
Larry Gibson
10-11-2013, 08:43 AM
The question is; PB'd or GC'd?
Larry Gibson
stocker1042
10-11-2013, 04:00 PM
Plain based...lubed, two grooves.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.