View Full Version : Stainless Pin Media
Wizwheel
10-09-2013, 04:59 PM
Anyone have sources for 10# or so of SS Pins?
I have: Pelletsllc 25# min
Midway, Sinclair, and STM
Any others?
Bayou52
10-09-2013, 07:19 PM
Sure, see the website for Bullseye-Reloading. Link is attached below. I'm a user of their "Ultra 47" pins. They are a little larger than standard pins. The result is no pins ever get stuck in the flash holes.
http://www.bullseye-reloading.com/
Bayou52
I see them on line on evil-bay a lot, from the above post, i'll have to try some out.
HGS
Bayou52
10-12-2013, 07:09 AM
A standard SS tumbling has a diameter of 0.041". Standard flash holes are manufactured with a 0.082" diameter. Therefore, the reason 2 standard pins sometimes get stuck side by side in flash holes.
From my experience, I've never had a stuck pin using the 0.047" diameter pins since 2 of those pins exceed the flash hole diameter.
I suggest using these larger pins for SS wet tumbling. Therer's no change in tumbling time or those great wet tumbling results using the larger SS pins. No downside that I can see.
Bayou52
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.