PDA

View Full Version : What loads for Lee 358-105-SWC?



Jayhawkhuntclub
10-07-2013, 10:58 AM
Interested in hearing about loads for both 38 spl and 9mm. Thanks!

Jon
10-07-2013, 12:51 PM
I found that it shoots high in my wife's revolver with 3.5gr of Bullseye. I haven't played with it much since.

Sgtonory
10-07-2013, 12:54 PM
Same i use 3.5g of BE and works great out of a stock Glock 17 with a COL just below the crimp grove think its 1.040

guncheese
10-07-2013, 08:42 PM
i have to seat down to 1.010 for my 9mm
and i had as much as 5.9gr of WSF in them HOT!!
im going to load with 3.6gr of red dot and try them wednesday
i think that will work out
mine drop at .359 so i run them unsized
and also the same load for .38spl with that bullet
and same for .45acp (3.6gr red dot 200gr swc looks like the big brother to the 105)

Wally
10-07-2013, 10:20 PM
In the .38 Special....I use 4.0 of Bullseye or Promo...I also use a poly filler...sized to .359".

carlson
10-08-2013, 09:03 PM
In 9mm I use 4.5 to 4.7 WSF sized to .358 in Browning HP and Lahti - OAL 1.00. Have also used 4.5 231 - same size and OAL. Browning runs with reduced rate spring - 13 & 15 lb (loads work with both springs).