PDA

View Full Version : .575 round ball



hatcreek
10-03-2013, 06:07 PM
8337983380Here are some results of the .575 round ball on top of 32grs of blue dot in a trap commander wad, cheddie hull 2 3/4", the ball sits on top of 2 28ga .125 fiber wads, and one in the base wad, fired at 50yds, from a 20ga 870, rifle barrel, the two shots on the left target that are low were winchester rifled slugs, the high shot to the left was a lightfield sabot, thanks to Ajay its coming together. The buck is by my son's tree stand hope he shows up for him in November. HC

SuperBlazingSabots
10-03-2013, 06:48 PM
Hello Hatcreek, it is good that you have achieved good accuracy with those 15 to 20 cents loads that will harvest your next deer, I kept asking all other's to please try them out and not miss out on this cute .575" RB baby but maybe they thought its a cheap load not worth trying, I too thought the Ear muffs costing 4 to 5 times more will do justice and they did help me get deaf!

I want more and more of my Elite Musketeer Brotherhood family to use them and have fun as they are great fun to shoot and pocket friendly!

Thank you for sharing your experiance, now other's might follow!

"An inventor fails 999 times, and if he succeeds once, he's in.
He treats his failures simply as practice shots. ~ Charles F. Kettering

Best regards,
Ajay
SuperBlazingSabots,com
BlazingSabots@Gmail.com
http://www.facebook.com/BlazingSabots?ref=hl[/url]
http://slugshooting.accountsupport.com/[/url] ... wforum.php
http://castboolits.gunloads.com/showthr[/url] ... ot!/page1
http://www.shotgunworld.com/bbs/view...f=118&t=196961[/url]
http://www.deeranddeerhunting.com/fo...p?f=43&t=39246[/url]
http://www.go2gbo.com/forums/slug-gu...old-is-gold-!/[/url]
-Elite Group of Slug Shooter's
We all, who take slug loading seriously are a dedicated family, who have taken it upon ourselves to perfect our tech. We experiment to find better techniques and share our knowledge.
Location: New Jersey. USA / Frankfort, W.Germany / London, UK
-Elite Group of Slug Shooter's
We all, who take slug loading seriously are a dedicated family, who have taken it upon ourselves to perfect our tech. We experiment to find better techniques and share our knowledge.

Hogtamer
10-03-2013, 08:22 PM
I'm getting similar results with a smoothbore Rem. 1100 and 31 grns Longshot. Great penetration and relative accuracy, that's a deadly load on any creatur in Georgia! Good job Hat!

hatcreek
10-03-2013, 10:44 PM
Hello brother Ajay, thank you again for all you do for the brotherhood of slug mania, can't wait to try your sabots, keep up the good work, we need your imput and advise, take care HC

hatcreek
10-03-2013, 10:49 PM
Thanks Hogtamer, sure am happy with the results. Take care HC

hatcreek
10-03-2013, 10:52 PM
83411These guys like to show up every now and then.

SuperBlazingSabots
10-04-2013, 10:47 AM
Hello Brother HatCreek, I really like the guy in the black fur coat, he looks really nice, goes to show you got good neighbors!

In my tests I have gone much higher with the charge for .575"RB and 20 ga load to:
Blue Dot:
1. 20-3” Fio.Italy CCI. 209M 38.6 gr Blue Dot .575” RB of 286 gr in Comm wad +2-.125-28+1/16, 6 point fold crimp! Dead-on hit 2 to 3 inch high 1606 fps
2. 20-3” Fio.Italy CCI. 209M 39.5 gr Blue Dot .575” RB of 286 gr in Comm wad +2-.125-28+1/16, 6 point fold crimp swirling! Dead-on high NM 1766 fps
3. 20-3” Fio.Italy CCI. 209M 40 gr Blue Dot .575” RB of 286 gr in Comm wad +2-.125-28+1/16, tight fit 6 point fold crimp! NM 1718 fps

LongShot:
1. 20-3” Fio.Italy Fed. 209A 33.5 gr Longshot .575” RB of 286 gr in Comm wad +2-.125-28+1/16, 6 point fold crimp! 1831 fps

All of you HS-6 lovers, here is your load of .575" RB in 20 gauge:
20-3” Fio.Italy Fio. 616 32 gr HS-6 .575” RB of 286 gr in Comm wad +3-.125-28, New Red OP wad topped with .125-28 6 point fold crimp! 1711 fps

At 15 to 20 cents a pop you can't afford not to use them for your next deer harvest, I usually shoot 50 to 100 shots just having fun!!

Keep it up Brother I'm enjoying your black fur neighbors.
It took you to get other's attention while I failed!

"An inventor fails 999 times, and if he succeeds once, he's in.
He treats his failures simply as practice shots. ~ Charles F. Kettering

Best regards,
Ajay
SuperBlazingSabots,com
BlazingSabots@Gmail.com
http://www.facebook.com/BlazingSabots?ref=hl[/url]
http://slugshooting.accountsupport.com/[/url] ... wforum.php
http://castboolits.gunloads.com/showthr[/url] ... ot!/page1
http://www.shotgunworld.com/bbs/view...f=118&t=196961[/url]
http://www.deeranddeerhunting.com/fo...p?f=43&t=39246[/url]
http://www.go2gbo.com/forums/slug-gu...old-is-gold-!/[/url]
-Elite Group of Slug Shooter's
We all, who take slug loading seriously are a dedicated family, who have taken it upon ourselves to perfect our tech. We experiment to find better techniques and share our knowledge.
Location: New Jersey. USA / Frankfort, W.Germany / London, UK
-Elite Group of Slug Shooter's
We all, who take slug loading seriously are a dedicated family, who have taken it upon ourselves to perfect our tech. We experiment to find better techniques and share our knowledge.

hatcreek
10-04-2013, 03:27 PM
Ajay I have tried 3" fiocchi hulls, with 34.5gr of blue dot, they perform excellent, the reason for the 2 3/4' hull is thats what I have, BPI was out of 3" last time I looked, I will give your loads a shot (ha ha) no pun intended, thanks HC

SuperBlazingSabots
03-24-2021, 03:03 PM
Hello Hatcreek, I just checked my loads above carefully but the CCI 209M primers are not at all consistent, I never felt good about them as I do Fed 209A

SuperBlazingSabots
03-24-2021, 04:24 PM
**--** The thing changed now is in stead of two .125-28 ga we need 2 1/2 under the .575" RB and one in the base cavity of the wad.