t find thread

[Morgan Astorbilt]

I'm trying to find a thread I read a few weeks ago. It described with photos, the design of Lee six cavity molds. I've always milled a channel in the sprue plate of my non-Lee 4 & 6 cavity molds to make it easier to run from cavity to cavity, and was wondering if the sprue plate on the Lee mold being it has that lever opening feature, is a simple rectangle in shape, or would need a fixture to hold it in my Bridgeport.
Morgan

[Morgan Astorbilt]

The above title should read "Can't find thread" . Don't know where the Can went.:-D
Morgan

[NVcurmudgeon]

The U.S. Navy seized the Can early in WWII. The Seabees needed it for their motto. They also took the Do from Congress because politicians never use that word.

[Morgan Astorbilt]

FOUND IT!!!
It was in the Group Buys room. A sticky byBuckshot titled "This is a Lee Six Cavity"

Enjoyed the humor, NVcurmudgeon:-D:-D:-D

[testhop]

that Buckshot is a real savy guy he knows just about everth ing must be a hiden genus

[felix]

Very true, Testhop! If it were not for him answering my posts when I first came aboard years ago, I would have found another. ... felix