View Full Version : Help to identify Brno vz24
Diva10
09-11-2013, 04:07 PM
I have recently acquired this rifle. It has a scope that I am unable to remove to see any numbers the stock has also been changed out with a modified Mauser stock. What information I am able to see is it has an emblem on the bolt that looks like a M circled in a C, the serial number is OR9252, the bolt serial number is 10812, it has a 22 inch barrel, the bolt is round and solid and has no front sight slot. It also does not have the leaf crest emblem.
Czech_too
09-11-2013, 05:36 PM
The following was taken from surplusrifleforum.com, specificly from the Czech rifle sub-forum
N, O, P, R blocks: 40,000 VZ24 short rifles produced in 1924. VZ24 bayonet (300mm blade). Q block was skipped. First VZ24 rifles.
You may possibly find more info there.
Dutchman
09-11-2013, 07:22 PM
You need to show a close sharp photo of the left side of the receiver to include all the markings.
Dutch
Diva10
09-11-2013, 07:36 PM
Will get a better photo tomorrow, thanks
Diva10
09-11-2013, 07:37 PM
Will do, thanks
Diva10
09-13-2013, 12:36 PM
Some more pictures
Diva10
09-16-2013, 12:20 PM
If I were to use american bullets what would be the closest, 30.06 is what I think from what I have read but not 100% sure.
There is a real good chance it is 8x57. If you do not know for sure please find some help (physical inspection of weapon) to confirm. Being honest- the bolt bend job a little rough but appears strong. I think I see a ground crest on front bridge. The VZ's were ground and shipped to Romania if memory correct. Bore condition is everything to these on value. Gtek
Diva10
09-24-2013, 12:33 PM
Thanks..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.