Handi rifle help

[scheller]

I needed to replace the hammer and now I can't get the darn trigger assembly back in the gun with everything working. Can anyone maybe talk me through it. Thanks

[Cactus Farmer]

Make "slave pins". Same size as the regular pins but short to hold the parts in place while you insert the sub assy. it the frame. They psh out as the regular pins are put in. Save 'em,you will need them again.........

[Lucky Joe]

Go here.........
http://www.go2gbo.com/forums/hr-centerfire-rifles/?PHPSESSID=tbv2vso04cs3lv24lac23nmtk1

[Whiterabbit]

slave pin. If you dont have one, take an old drill bit and cut off the back. Works like a champ. If you look up the handi trigger job PDF on the internet, it'll show you where to use it and how.

Makes re-assembly cake.

[Single Shot]

I sent scheller
a PM with info and included PDF links to the trigger job so he can make the jig. I'll post a new thread about the Trigger Job.

[Whiterabbit]

I never found the jig to be all that important. The roll pin is kinda critical for me though!