unclogum bill
09-02-2013, 10:37 PM
A few weeks back did my first post looking to find a load for a $95 dollar 7.62x54R, who had a bore of .314. I had shot some jacketed .310’s I got my hands on but was not impressed with anything but the rifles feel. It was fun to shoot and fit me right. Only 40 inches long and with sling, an easy carry with no worries about dings to it. Anyhow purchased .314 sizer and Lyman mold that throws about 200 gr. of lead. Found I didn’t have the load data to make it go. You guys came to my rescue , load for which I had powder was suggested. Started low and made two of each till I got up there where I then, made four of each. The sweet spot was 30 of 3031, Thirty one grains was to much , flyers. Was then suggested I try 29.8 with a dab of filler. Well I’m ready with 23 ready to go. Unfortunatey I got a trip to DC coming up so it will be a bit before I try them . This is all top draw stuff for me. Raking the range lead, processing it, molding the bullet. The lube I made years ago out of candle wax and STP . Why change a good thing.
Anyhow really just wanted a chance to try posting pictures. Tell me is it wrong to sit next to a guy with a thousand dollar plus gun and out shoot him?.
80876808778087880879
Anyhow really just wanted a chance to try posting pictures. Tell me is it wrong to sit next to a guy with a thousand dollar plus gun and out shoot him?.
80876808778087880879