Can Someone Recommend a .430" +/- 429421 HP mould?

[35 Whelen]

I'm looking for a 429421 HP mould for my .44 Special NM Blackhawk. I'd like it in the 250-260 gr. range with the Cramer style HP pins. I've been to the MiHec site but they don't appear to have one. The Lyman version is just too slow in the production department.

35W

[MtGun44]

Send a DC Lyman mold to Eric at Hollowpoint Services. I did and it is
really nice. This is the Cramer conversion, and he has added a simpler
version with a single big insert in the bottom, automatically works the
pins.

http://castboolits.gunloads.com/attachment.php?attachmentid=50575&d=1248747376

Bill

[kweidner]

I have a NOE. Love it. Pushed to 1322 fps with 2400 it is minute of pear at 100 yds. Spectacular results. Will make it through 4 milk jugs shearing nose but base stays intact and weighs close to 200gr.

[Bucking the Tiger]

Second the NOE. Have a four cavity 429421 that is far faster than old pin and lug Lyman.

[35 Whelen]

Ah!! I glanced at the NOE site and didn't recognize the "RG" as indicating a HP mould. I have one of their 4-cavity 429421 moulds and really like it. But on the other hand, I love the 44-250KT which I could have converted by Eric. I also have a couple of 2-cavity Lyman 429421's laying around.

Thanks for the help guys. You've pointed me in the right direction!

35W

[Mal Paso]

How about the best "Keith" in a hollowpoint?

http://castboolits.gunloads.com/showthread.php?202158-Rerun-Mihec-H-amp-G-503-Clone-432-250

[frank505]

NOE because it casts quickly, very well and the bullets drop at .435 which my 44 Special vaquero needs. The throats are .433.... my Flattop loves this bullet also. Very accurate in both.