458 SOCOM with Accurate Molds 460-325S-- need starting loads and COL

[frankenfab]

Anybody here using this mold?

[TonyM]

I'd start with 25gr lil gun, and latter up to around 29...30 at the most (Watch for pressure signs around 27-28-29gr. If you start to see flattened primer/bolt swipes, etc., I'd knock it back ), and a COAL of 2.2 to start with.

Also, if your not using gas checks... don't even bother....

[JZdryfly]

This probably doesn't help you much, but I'm using the Accurate 460-430 with 31.0 grains of Reloader 7 and getting 1 1/2" groups. Shoots mild, but still knocks the rams over at 200 yards