PDA

View Full Version : Range report on Piglet method



Freightman
08-23-2013, 03:17 PM
Went to the range with six loads for my 30-06 from min jacketed load to max one gr at a time. Had no lead, no paint, no problems was using a 200gr Lee boolit cast out of soft lead (hard wouldn't be a test) from 2100fps to 2400fps + so i figure it was a good test to see if it was going to work.
Accuracy was as good as with any lube I have used and don't shoot jackets so don't know about that.
I am not recommending or not recommending you have to make your own mind up on whatever you try but it is fun and i need something to entertain me.
PS the rifle looked as clean when I finished as when I started. I can't push a lubed boolit that fast not because of lead but accuracy isn't there starts downhill about 1900fps.

Russel Nash
08-23-2013, 05:08 PM
Thanks for the report!

I take it that you put gas checks on them???

Freightman
08-24-2013, 04:33 PM
I had already instaled cks before I started this project will try without later