View Full Version : beagling
krallstar
08-19-2013, 10:11 AM
I tried beagling my lee mold. Boolits did come out bigger. Question i have is they are alittle out of round. Will running these thru the sizer bring them back into round. I ran some thru my lee sizer at .357 they appear to be round. And 1 cavity seems to hold on to the boolit. Next i think i will try lapping.
Sweetpea
08-19-2013, 10:21 AM
Yes, they will come out round after sizing.
I would remove the tape, then lap it.
Re-beagle as necessary.
Brandon
krallstar
08-19-2013, 10:49 AM
Yup, that's the next step.
None of my 6 cavity Lee moulds have needed Beagle's remedy. I have had a couple of two cavity versions that were skimpy in that dimension, but I rarely use them and keep forgetting to apply the remedy before the infrequent uses. Maybe next time.
prs
mroliver77
08-20-2013, 12:45 AM
All of my .357 bore guns like .360 boolits. I think all the wheel guns demand that size.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.