PDA

View Full Version : Epoxy coating 9mm bullets


capt.hollis
08-15-2013, 01:28 AM
Anyone here tried Epoxy coating your bullets? It's striking my interest ...
Thanks
jmort
08-15-2013, 01:45 AM
Yes, check out the threads. Klass Kote. Check out this video. He is using some kind of "Euro Coat" But method is the same. Look in the bullet lube forum. Much, much info
http://www.youtube.com/watch?v=uiFxAPtx4c0
Shiloh
08-15-2013, 11:24 PM
How much of this material is left in the bore??

Shiloh
jmort
08-16-2013, 12:55 AM
Mostly little/nothing. Multiple threads, hundreds of posts and generally good/excellent results. The methods are electrostatic powder coat, works very well, probably best. Hi-Tek which seems to works well. Laquer thinner and powder coat and expoxy two part paint. Done right, bore will be clean.
bangerjim
08-16-2013, 01:13 AM
Go with electrostatic powder coating using the Harbor Freight $59 gun. Their powder is cheap and the result are far better than ANY liquid coating method! "Powder thru the mail" is VERY costly. A little over 5 bucks at HF!

Do a search on my posts and find the PC coating info. I do a lot of it and no lube is needed with no leading.

bangerjim