View Full Version : Flat nose top punch for .358
glockky
08-12-2013, 10:32 PM
I am need a flat nose top punch for the lyman 4500 anyone know where I can pick on up at. I plan to use it with the lee .358 158gr flat nose bullet.
Catshooter
08-12-2013, 10:37 PM
Either members Buckshot or The Perfessor can make you what you need. I can recommend both highly.
Welcome to the forum too.
Cat
I believe theperfessor is not doing work at the current time but will be back up in the coming months (October IIRC).
http://castboolits.gunloads.com/member.php?4163-theperfessor
Buckshot does excellent work, I had him make me a custom lube/size die once.
Duckiller
08-12-2013, 11:56 PM
Get a nose punch with a BIG flat area. You can also use it for .40, .44, and .45.
Mk42gunner
08-13-2013, 12:30 AM
I have sized thousands of flat nosed boolits using a piece of ¼" bolt about one inch long for a top punch. It works on multiple calibers too; I have used the same cut-off bolt for everything from a 257420 to a 452424.
If you want to get fancy, you can leave the head on, file it flat and turn it in a drill to closely fit the meplat of the boolit.
Robert
wrench
08-13-2013, 11:26 AM
Accurate molds makes very nice flat top punches as well...
http://www.accuratemolds.com/order.php
94Doug
08-14-2013, 03:49 AM
There are the ones by Lyman and RCBS for their WC's....like the 429348. You'll have to check CastPics for the number.
Doug
DavZee
11-26-2013, 09:08 PM
Accurate molds makes very nice flat top punches as well...
http://www.accuratemolds.com/order.php
I just purchased the 3 flat punch set for $8 shipped! A most excellent deal!
Wayne Smith
11-27-2013, 04:01 PM
Brass bolts are easy to size with a drill motor and rough stone. Grind the face flat and cut off to 1" and you have a top punch to fit that die. I have two sizes so far.
John Guedry
11-27-2013, 05:33 PM
I use a 1/4 in. bolt with the head smoothed off.
Kimber bob
08-23-2014, 09:03 PM
I agree, just recieved mine (top punches set of 3 from accurate molds) in the mail today. Very nice quality and at a very nice price. If you are using flat nose (semi or wad cutter) boolits then this is a great and cheap way to go
Nice Job guys!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.