Help! Magma Digital Temp Controller trouble!

[Silverbullit]

Thanks mates, problem solved!

Erik from Magma swiftly helped me out.

This thread can be erased :)

[el34]

That's a puzzler, if the display shows temp is going down while the pot is heating up, you probably have the thermocouple connected backward. It has + and - wires and has to be hooked up correctly. No damage will happen if backwards, just confusing behavior.

Seems like you'll need to score instructions somewhere, I googled it and found next to nothing but their ph # is here-
http://www.magmaengineering.com/contact-us/

Maybe they can tell you the brand of the controller, that'd make researching more successful.

[Silverbullit]

Thanx el34!

[kitsap]

Silverbullit,

What you downloaded was the data sheet. Here is where you will find the manual such as it is.

http://www.instrumart.com/assets/TTMJ4manual.pdf

There is a set of menu options, input table, and sensor options. Also some troubleshooting tables on the last page.

Maybe not all of your answers but more than you have now.

DougF

[Silverbullit]

Erik from Magma helped me solve the puzzle,
it was a real simple fix - just reversed the sensor (two cables red/white)

An voila - it rocks! :)

Thanks mates for your help, and thanks Erik for giving me the fix!

/Silverbullit