IDEAL #1 Luber and Sizer original instructions

[MarkK]

Ideal #1 luber/sizer pdf of original instructions attached. Picked up said tool (barely used) earlier this year at an estate sale. Are bullet sizers still available for this model? Take care, Markk

[357maximum]

Unless I am halucinating all lyman H&I dies will fit that machine.

[leftiye]

Go Smiegle! Avatar not a good fit. But does convey madness if that is the theme.

[gunoil]

got pic?

[357maximum]

Go Smiegle! Avatar not a good fit. But does convey madness if that is the theme.

Inner turmoil is what I was aiming for, but madness fits occassionally too I guess.

[mroliver77]

Dies are interchangeable with any new lyman or RCBS dies. I have and use a no 1 sometimes.
The original dies had no tapered lead and can suck to use.
J

[fryboy]

cool score ! if it's complete with lube wrench and table mount all the sweeter !!! j,s correct on that other than the taper on the bottom ( a much better mouse trap ) it fits and the o-ring on the new ones is nice as well ( a lil dab of oil on them doesnt hurt anything ) the newer pressure nut/piston may or may not fit ,if it doesnt the new pressure screw and piston can be made to work but then the original wrench wont fit ( needs a 1/4" hex )and the top wont drop down over the fatter part of the new screw and would need enlarged a wee bit to fit , still cool score and yes sir - fotos please or it didnt happen :P :kidding:

[MarkK]

Pics posted. Man, this sucker is stuck with old sticky brown lube. Will load of with some Lithi-Bee and give'r a try.

[fryboy]

the handle and clamp ...sweet !! and the box !! wow , it does look like the die isnt all the way in or something ? umm old stuck lube ...dried out too i'd bet , a bit of heat should help