View Full Version : Dr. Tranny Assembly Goo
Does anyone have a technical data sheet on this produce or know what is in it for sure?
Don't have any idea of whats in it but it sure works for massive case forming. Must be removed with lacquer thinner.
shredder
07-17-2013, 04:13 PM
Apparantly it also dissolves in transmission fluid. I know the "ultimate lube" thread referred to it a bunch of times. Mr. Geargnasher should be able to answer your question. Otherwise a technical data sheet should be available on line if you know how to find the product.
Apparantly it also dissolves in transmission fluid. I know the "ultimate lube" thread referred to it a bunch of times. Mr. Geargnasher should be able to answer your question. Otherwise a technical data sheet should be available on line if you know how to find the product.
Well the only thing I found was a material safety data sheet (MSDA)
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CDIQFjAB&url=http%3A%2F%2Fwww.epartsworld.net%2FMSDS%2FLube gard%2FBlue%2520Assemblee%2520Goo%2520Jul%252002.d oc&ei=uvzmUYP-FqbHiwLno4CACg&usg=AFQjCNGjw83f1gdMLOYQ5v3xthB-ylN6ZA
and then what the manufacture has for info. on their site:
http://www.lubegard.com/pdfs/GOO_PS.pdf
really nothing that provides great detail to it.
PS Paul
07-17-2013, 04:35 PM
Read the title and thought this was a thread saying Moochelle O, the first tranny, had been given an honorary doctorate. Silly me.
Grump
07-17-2013, 05:34 PM
Undisclosed petroleum components, a nice enough melt point, favorable flash point and doesn't burn very aggressively.
No chlorine or PCB nastiness, but enough sulfur to produce a bit of hazardous sulfur dioxide (that WAS what I saw, right?) if you do manage to set it on fire.
Otherwise it's just one big trade secret but we know what dissolves it.
runfiverun
07-19-2013, 10:13 AM
it's base is a hydro-treated and then solventized paraffinic.
it's similar in make up to old school Vaseline, but of course it has had other stuff added to it.
there is a green which has a 130-f melt point and a blue with a lower melt point 109-f [airc] that is within a few degrees of Vaseline's melt point.
shredder
07-19-2013, 02:29 PM
Well the only thing I found was a material safety data sheet (MSDA)
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&ved=0CDIQFjAB&url=http%3A%2F%2Fwww.epartsworld.net%2FMSDS%2FLube gard%2FBlue%2520Assemblee%2520Goo%2520Jul%252002.d oc&ei=uvzmUYP-FqbHiwLno4CACg&usg=AFQjCNGjw83f1gdMLOYQ5v3xthB-ylN6ZA
and then what the manufacture has for info. on their site:
http://www.lubegard.com/pdfs/GOO_PS.pdf
really nothing that provides great detail to it.
Hmmmmm. That is all I found too. Trade secret I guess!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.