.308 and Lyman #311284 210gr

[atr]

75976range results 7-12-2013

range 50 yards from the bench
rifle: Savage model 99C / .308Win
Lyman mold #311284 / cast 75972210 gr
Sized .311 / moly superlube
Lymany M die used + slight crimp
winchester Large rifle primers
R-P cases /neck sized

note some vertical stringing with the 26 gr / 4895 load

[catboat]

Nice groups. What is the rifling twist on that rifle, 1-12"? Time to go squirrel hunting, and go for head shots.

[atr]

yes, the twist is 1-12
I am going to try the 16gr/2400 load at 100 yds next.

[williamwaco]

That is good load in the .30-30 also.

[atr]

OK I tried these at 100 yds...
16 gr /2400.....I had a good group going but the las shot I know I pulled Left....otherwise I am satisfied
I upped the charge of 4895 to 31 gr...and had a good group going....but I really must have dropped my shoulder on a couple that went high...either that or something went seriously wrong in my reload....I think I will double check the case lengths and make sure the crip I am putting on is uniform
I noticed a lot of heat wave distortion in the scope/target as the barrel heated up
I am going to stick with these loads they both seem to work well at 100yds...

atr7607276073

[Smoke4320]

looks good to me ..
Will have to try those myself in 308 and 300 Blackout
thanks for posting loads and pics

[Smoke4320]

what kind of velocity are you getting with those loads

[atr]

velocity
with 16 gr 2400...about 1425fps
with 31 gr 4895....about 1850fps

[helice]

atr,
How deep are you seating that boolit? I have had really nice results with the 284/210 in a Spanish Mauser in 308 but -by jimminy- I don't shoot groups like those:shock:[smilie=p:. Isn't that a dime? What is your rifle?