View Full Version : Load From a Disk users
Adam10mm
10-01-2007, 02:43 PM
Search didn't come up with anything.
Just got it in the mail today. I installed it and used it to get my load for 45/70 of a 350gr Hornady FNSP with 47gr of IMR4198 for a 18.5" barrel. Said 47.7gr was optimal and showed chamber pressure. Neat program.
How many use this and what do you think of it?
50 Caliber
10-02-2007, 11:17 PM
Never heard of it, Who makes it?
Adam10mm
10-03-2007, 11:44 AM
Loadammo.com
Maven
10-03-2007, 11:49 AM
LFAD was developed by Wayne Blackwell aka W. Square Enterprises in Houston, TX. Wayne's e-amil was lfdw@pdq.net (ca. 1999) and homepage was http://home.pdq.net/lfdw/index.htm (also ca. 1999).
50 Caliber
10-03-2007, 01:17 PM
Thanks. I will check into this and see If its something I can use.:-D
Maven
10-03-2007, 01:20 PM
The address freakshow gave is more current and correct. It is www.loadammo.com
50 Caliber
10-04-2007, 11:24 AM
Alot easyer to find.
oldfart
10-05-2007, 06:52 PM
its ok, nuttin to brag about
HollandNut
10-05-2007, 08:49 PM
I have it and have tinkered with it quite a bit , it is IMO way over on the safe side ..
The Lott and a few others are out of parameters or so such crap between the bullet weight / powder charge ratio .. Tells me my chronied 2300~ 500 grainers are only going 2050~ ..
I'm disappointed in it myself .. not worth 70$ IMO ..
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.