help id'ing missing parts of lyman 429 HP mold

[Smoke4320]

7493374932Got A LYMAN 429421 HP mold from an estate
sale .its missing the hp parts.h
Hoping someone here has this mold and can send me pics of what is missing
so hopefully I can find parts to make complete again
also are there an tips concerns to look out for with this mold

[theperfessor]

If you can't find the parts you might want to contact Eric at Hollowpoint molds.

[Wayne Smith]

Eric or our own Buckshot can set you right up with just what you need.

[Bent Ramrod]

You are missing the hollow point pin. IME, even if you are fortunate enough to find one, it will be slightly different in size from the one that was matched to the mould. I have a similar partial match in a 429244 HP mould, and I have to hold it carefully when I fill it to keep the pin from wobbling off-center. Better to make one, or have one made, that's a good sliding fit in the hole in your blocks.

If you have a lathe and a drill press, it's pretty easy to make one from a piece of 5/16" or 1/4" rod and a piece of wood. You could probably do it with a drill press and a file, and some patience.http://castboolits.gunloads.com/asset.php?fid=71220&uid=328&d=1372627020

Dunno what happened with that picture, but the link is the same as the enclosure.

[GLL]

Buckshot has made MANY HP and Hollow base pins for me !

http://www.fototime.com/FC1FBCABD1CE997/orig.gif

Send him the mold and it will be returned "all better" in very short order! :)

Jerry

Jerry

[GP100man]

Send it to Buckshot & let em custom fit 1 , money well spent & it`ll be as close to original as possible.

I`m still "out to school" on the larger HP cavitys .

[Smoke4320]

Buckshot it is .. he is already making me Lee push thru sizers and lyman M expanders

Thanks all