PDA

View Full Version : More on the 270 with cast



Calamity Jake
06-19-2013, 12:09 PM
This is from my Rem. 700 sporter weight 270 with the Saeco #270 at 138.5 gr in my alloy
in FED. brass pushed with a CCI LR and surp. 4895 at 25.5gr with a dacron filler.
These were shot two weeks ago, weather was cool/clear with a north wind at about 10mph,
shooting was into the wind from a bench and at 100 yards.
These 20 rounds were all I had loaded and they were loaded 7 of 09.
The two lower groups were shot from a cold/clean barrel, as you can see the groups
got tighter as the gun warmed up.
I'm going to shoot this one more often.

http://photos.gunloads.com/images/CalamityJake/270castat100800x600.jpg

quasi
06-21-2013, 02:59 AM
that's good shooting and a good load. .270 moulds are hard to find. I have a Miha 6 cavity to try when I get time.