PDA

View Full Version : project to achieve the dies



kickboxing
06-14-2013, 02:56 PM
hello to all,

who could give me the project to build the dies that are used to create the bullets HPBT for 223R starting from the cases of .22 lr ?

257
06-14-2013, 05:34 PM
i'm not following what you want? do you want a set of blueprints to build the dies?

kickboxing
06-18-2013, 11:50 AM
yes :)

Cane_man
06-18-2013, 12:26 PM
dont think you will find a set of detailed drawings with dimensions... corbins.com has all the drawings but navigating that site is a PITA, you will have to scavage through the archives here in cb to get the dimensions for the dies and punches... just start a thread and ask questions and there are many experienced people here to help you out... in th end, though, it comes down to making something and trying it out then make changes as needed...

gunguychuck
06-18-2013, 10:44 PM
Making swaging dies is not like standard machining operations that you do off a blueprint. If you don't know what diameter a bullet is supposed be and what ogive you want and how that is figured you need to study up some more. You should be able to make your own drawings off the top of your head if you know anything about bullets.

Cane_man
06-19-2013, 12:29 AM
this is a pretty good article that will give you the overview for the design of the dies... the exact dimensions can be found in the archives, do a search on cb and it is like looking for gold nuggets as you will find them here and there, after a while you got a treasure!

http://www.sebagosales.com/swagedbullets/Rifle_Mag%20_Number_62_Swaging_Article.pdf

MrWolf
06-21-2013, 06:51 PM
Thanks Cane_man. Interesting article as I think I will go the route of acquiring a lathe and make my own set. Already have friends keeping an eye out for a metal lathe.

blltsmth
06-21-2013, 10:56 PM
Go here:http://www.rtconnect.net/~wjmanley/S...ASswagedie.pdf

Cane_man
06-21-2013, 11:48 PM
^^^ doesnt work for some reason, this one does... the Ted Smith booklet, good info but it wont give you detailed specifics by caliber and it is somewhat hard to follow the ramblings for me, with all due respect to TS has forgotten more about swaging than i will ever know:

http://www.rtconnect.net/~wjmanley/SAS_Die_making/SASswagedie.pdf

algunjunkie
06-21-2013, 11:56 PM
Link not working for me.

algunjunkie
06-21-2013, 11:57 PM
Never mind the second one worked just fine. Thanks.

MrWolf
06-22-2013, 10:16 PM
Thanks - second link worked for me

kickboxing
06-28-2013, 05:02 PM
thanks for the info :)

aaronraad
06-29-2013, 02:12 AM
I found the Bob Simonson article to be quite useful in understanding the die-to-jacket diameters in terms of springback at each stage. You should be able to work back from your final diameter and just be careful what diameter tolerances you run with at each stage.

http://www.sebagosales.com/swagedbullets/Rifle_Mag_Number_6_swaging_article.pdf

Cane_man
06-29-2013, 11:03 PM
aaron, thanks for posting that... one interesting tid bit from the article is that the bench rest shooters like to have the final bullet OD slightly over sized to create a "pressure ring", said they shoot for 0.2243 as a final OD for the 0.224 caliber... sounds like what we are trying to do with cast boolits