PDA

View Full Version : Loads for 311291 in 30-06?



woody402
06-13-2013, 08:36 PM
Anyone have a favorite load with a lyman 311291 I. The 30-06? I'm thinking of loading up some for my 03-A3. Thanks.

Char-Gar
06-13-2013, 09:44 PM
16 to 18 grains of 2400

Kraschenbirn
06-13-2013, 11:34 PM
Start with 28 gr of IMR4895 (or 27.5 gr H4895) and work up in 1/2 gr increments. Somewhere between 29.0 and 31.0 you should encounter happiness.

Bill

woody402
06-14-2013, 06:57 AM
Thanks Bill. I have a bunch of 4895. I will start there.

Shuz
06-14-2013, 09:59 AM
I like 34g of 3031. It has worked well in several .30-06's that I have owned. 2 different -06's shot less than 1" 5 shot groups @100 yds with this load. Velocity is in the 1950 fps area and heat treated 311291's were used.

27judge
06-14-2013, 10:15 AM
10-12 grain unique gives me under 1 inch at 50 yards nice light load tks ken

woody402
06-14-2013, 06:14 PM
Thanks for all the info. When you guys load 10-12 grains of unique do you fill the case with anything else to make up for the light charge? I would try Trailboss but it is not available locally right now.

27judge
06-14-2013, 06:18 PM
A filler is not used with unique nor is it recommended in the manuals . I have used 4198 for good med load and I use a filler with that one. The 311291 is a very good design I use it in my 30-30 ack imp with good results. I also used it in my ar15 300 blackout it was a real tack driver but the round nose gave me to many hang ups in the AR 15. tks Ken

woody402
06-14-2013, 06:21 PM
Thanks Judge.

462
06-14-2013, 08:42 PM
My '03-A3 and the 311291 have a love affair with Unique.

Ben
06-14-2013, 10:47 PM
It goes without saying .......BUT....when using 10 - 12 grs. of Unique, be certain you have a loading technique that will guarantee that there will be no " Double Charges."

27judge
06-15-2013, 12:30 AM
I agree and use a small pencil flashlight just for that purpose. Been loading that round for over 45 years in 2 different 03 A4 and now a t/c encore heavy custom barrel and I still reach for the flashlight to check the loading block tks ken

Larry Gibson
06-15-2013, 03:14 PM
Start with 28 gr of IMR4895 (or 27.5 gr H4895) and work up in 1/2 gr increments. Somewhere between 29.0 and 31.0 you should encounter happiness.

Bill

Ad a 3/4 gr dacron filler for even more "happiness".

Larry Gibson

woody402
06-17-2013, 03:44 PM
I used 12 grains of unique today. Works good. I will probably stick with that.

woody402
06-17-2013, 03:45 PM
My next Project will be the 308 win. Probbly start with the same load.