Rapine mould

[wendell]

I have a rapine. 358 149gr. Hbrnfp moulder that I used in a r&d conversion.
Now I want to use this bullet in a Taurus model 85. 38 special revolver.
Any idea what would be a good starting load? I thank I used 2grains reddot in my Remington 1858 conversion. That was at least 15 years ago so not sure if my memory is correct.
Any help would be appreciated.

[Larry Gibson]

I'd use load data for any 150 gr cast bullet. Start at the "start" load and work up as always.

Larry Gibson