jonp
06-11-2013, 04:55 PM
I posted this as a reply to another thread with the same question but thought it might be worth a thread.
I just made up some 175 lswc boolits. TC to .472 with OAL at 2.22. Using this with 5.5gr w231. These cycle my Kahr CW45 nice and feed fine but I do have a question.
I notice that at this OAL the case mouth is over the driving band and up on the shoulder a little so the boolit looks recessed into the case. Is there any downside to this such as extra wear on the brass or inadequate accuracy problems? These are the first boolits that I have done like this and I have always had mixed results with lswc's
I just made up some 175 lswc boolits. TC to .472 with OAL at 2.22. Using this with 5.5gr w231. These cycle my Kahr CW45 nice and feed fine but I do have a question.
I notice that at this OAL the case mouth is over the driving band and up on the shoulder a little so the boolit looks recessed into the case. Is there any downside to this such as extra wear on the brass or inadequate accuracy problems? These are the first boolits that I have done like this and I have always had mixed results with lswc's