PbHurler
06-08-2013, 04:49 PM
I'm going to begin load development with this boolit; I've seated a dummy to 1.125" OAL & taper crimped to just remove my case flair. This length drops in my barrel fine (passes the "plunk test") and feeds from the magazine fine as well. This OAL places the mouth of the case about midway on the front band.
I'm just curious as to what OAL's you guys are using when loading this boolit.
FWIW, I'm using starting loads to begin with & the handgun is a full sized Springfield XDM.
Thanks in advance for your comments.
I'm just curious as to what OAL's you guys are using when loading this boolit.
FWIW, I'm using starting loads to begin with & the handgun is a full sized Springfield XDM.
Thanks in advance for your comments.