Miha Prevec 125GR 9MM H.P. OAL

[PbHurler]

I'm going to begin load development with this boolit; I've seated a dummy to 1.125" OAL & taper crimped to just remove my case flair. This length drops in my barrel fine (passes the "plunk test") and feeds from the magazine fine as well. This OAL places the mouth of the case about midway on the front band.

I'm just curious as to what OAL's you guys are using when loading this boolit.

FWIW, I'm using starting loads to begin with & the handgun is a full sized Springfield XDM.

Thanks in advance for your comments.

[Low Budget Shooter]

That's exactly my set-up for that bullet. LBS

[captaint]

My OAL is also 1.125. Sized to .358 for my 2 9mm's. Runs like a champ. That's the only boolit I cast anymore for my 9's. Mike

[Beerd]

I checked my records last night.
Mine are loaded to 1.085"
..