.562 multi-ball 20 Gauge load

[skiforce75]

Any one ever loaded 20 ga with 2 .562 balls? It would be approx 537 grains or 1.22oz. Loads for 1.25oz 20 gauge 3" should work just fine. I am not concerned with over pressure or any other "load warnings". Just interested in if anyone actually has hands on experience with these loads. Thanks in advance. I just got a lee .562 RB and love to experiment.

[skiforce75]

That is kinda what I figured. Thanks for the reply.

[Hogtamer]

Killer results with a single .570 ball in a wad cup with 28 ga nitro cards underneath the ball. The .562 may work fine a paper liner in the shot up to tighten up the fit.

[Hogtamer]

Oh, and that's a 2 3/4 in hull.

[skiforce75]

I have measured all my bores and 575 is always too big in a wad. 560 seems to be just right so I went with the 562. Nice thing about Lee molds is you can try many for a low price and find what works.

Thanks all.