kingemandigger
06-03-2013, 11:21 PM
Just ordered a lee 7/8 oz. drive key type slug mold and am kinda stumped about exactly what loads to use for it. Universal and hs-6 are obviously the best powders to use but in this time when components are scarce, I need to use some of what I already have. Would like some comments and experience using red dot, wsf, and unique.
Here's what I'm thinkn
Win AA hull
CCI 209
WAA12 pink wad
19.5 grains red dot or 28.5 grains wsf
Fiber base wad
One thing I am worried about is such a light payload with the wsf.
Comments or concerns welcome
Here's what I'm thinkn
Win AA hull
CCI 209
WAA12 pink wad
19.5 grains red dot or 28.5 grains wsf
Fiber base wad
One thing I am worried about is such a light payload with the wsf.
Comments or concerns welcome