View Full Version : 90gr hornady xtp in 30 carbine
rmatchell
05-30-2013, 07:38 PM
I was given some 90gr xtp jwords from a guy at work and have been searching for a load in the 30 carbine without any luck. I am using 2400, any help would be great.
Larry Gibson
05-30-2013, 11:06 PM
I use them with H110 and all I can say is awesome!!!!
Hornady manual starts at 11.6 gr 2400 with a max of 13.7 gr.
Larry Gibson
http://img.tapatalk.com/d/13/05/31/y8uhaput.jpghttp://img.tapatalk.com/d/13/05/31/utezuze2.jpg
JeffinNZ
05-30-2013, 11:27 PM
XTP's are brutal. I used to launch the 100gr .312 version from a SKS at 2500fps.
rmatchell
05-30-2013, 11:39 PM
thank you for the information, that is what I needed. I am also going to pick up a hornady manual next week to help build up my reference materal.
thank you for the information, that is what I needed. I am also going to pick up a hornady manual next week to help build up my reference materal.
They are good to have, I would get the layman one too. It's nice to just grab a book and get your starter loads then searching the Internets and Possibly getting bad info..
rmatchell
05-31-2013, 06:48 PM
yeah, I have a few different Lyman and speer, but not alot of recent stuff. Most of my loads come from Lyman 3rd and 4th cast books havent messed with jwords since I started casting.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.