New mold LEE

[beppe]

Traduzione
today I tried the new Lee 124-356 mold, it is my impression, but it seems that unlike the old model, this new cool before?I am very pleased with the result:lol:

Oggi ho provato il nuovo modello LEE 124-356 , sembra che questo nuovo modello si raffredda meglio ,è solo una mia impressione ? Sono molto soddisfatto del risultato .71974

[beppe]

Traduzione
the bullets falling from the mold measuring .358, and the slug of my glock 17 9x21 measure .357. you do not need sizing.7197671976

[swheeler]

beppe; thanks for the report, sounds like you approve of Lee's newly designed molds. I have to get one of the new ones and see how it works.

[Hamish]

beppe, happy to hear that the improved mould is working well! It appears that you have been blessed that the mould drops at .358, this should be very good. I assume that you are tumble lubing in Alox?

Ciao, compare!

[beppe]

Traduzione
hello friends! have been lucky that my mold is .358 bullets, now use only alox in all my types of bullets, and this has given me great results so far.
I bought a lyman 4500, because it has greater choice die size-dies


ciao amici ! si sono stato fortunato che il mio stampo fa i proiettili .358 , adesso uso solo alox in tutti i miei tipi di proiettili , e questo mi ha dato fino adesso ottimi risultati.
ho acquistato una lyman 4500 , perche questa ha maggiore scelta die size- dies.

[Dakotared]

How does this shoot for you? I have the same mold and I am having a hard time getting it to shoot good. I am using w231 and have tried any where from 4 to 4.5 gr of powder and a seating depth of 1.105 to 1.111 any farther out and the bullet hits the lands. I get horrible leading and tumbling. I have slugged my barrel and that is .3555 and the bullets are .358. Any info would be greatly appreciated.

[Shiloh]

Traduzione
today I tried the new Lee 124-356 mold, it is my impression, but it seems that unlike the old model, this new cool before?I am very pleased with the result:lol:


That mold drops to small for me.

Shiloh

[beppe]

these bullets, I have not had time to try them. I want to try with 3.2 grs of imr 700x to start.
I also use a mold LEE TL-356 -124 rn, and load with 4.6 grs of VV 320 N, have a speed of 1050 fps, these proietili are small (.356) but rather are accurate to 25 yards.
Traduzione
the barrel of my glock is .357 diameter, I think that the new bullets will be more precise, I have to check the pressure.
I always use 124 grs bullets to a power factor of 130.this gives me a speed that does not dirty the barrel ever.

[beppe]

Traduzione
the next experiment with the glock is: 358-105 SWC LEE bullet, I want to try this bullet in the 9x21 cartridge case at a speed of 1200/1300 fps.
Traduzione
the next experiment with the glock is: 358-105 SWC LEE bullet, I want to try this bullet in the 9x21 cartridge case at a speed of 1200/1300 fps.
in my guns 9x21 I like to use only light bullets.
nella mie pistole 9x21 mi piace usare solo proiettili leggeri .
Tanfoglio 3 in stock, I used bullets 356-90 grs not made by me.
I've loaded with 4.8 grs of cheddite S END. this powder is similar to the N 320 and imr 700x. I have had excellent results, heavy gun and bullet very fast, I like it very much!

[beppe]

this powder CHEDDITE S FINE , it is fast and makes the cartridges with constant speed acceptable.
72090

[Vinne]

[QUOTE=beppe;2240393]this powder CHEDDITE S FINE , it is fast and makes the cartridges with constant speed acceptable.


Where did you get that powder??

[beppe]

in Italy, now, this powder is used a lot because it costs a few euro (36 euro 1 kg), I prefer the powder vithavuori, but it costs 80 euro 1 kg, Italy. GM3 is also an excellent powder for the 9x21.

in Italy, now, this powder is used a lot because it costs a few euro (36 euro 1 kg), I prefer the powder vithavuori, but it costs 80 euro 1 kg, Italy. GM3 is also an excellent powder for the 9x21

[Vinne]

I used imr 700x in my shotgun shells but found it to leave my gun very dirty. Is it the same with Cheddite powder?? Is it a powder that is hard to find...and are primers also hard to get there??

Thanks paisano!!!

[jdgabbard]

the new molds look like they're a vast improvement. However, until they redesign that sprue-plate I'm not touching them.

[MT Gianni]

Que bene que miren. Felizioneces.

[beppe]

ciaooooo! the cheddite, is an excellent powder, but very dirty gun.
every 5/600 bullets it is better to clean the gun.
the 700 x I like much more than the cheddite, but you dose very badly in the dispenser
the dirty cheddite much more than 700x.:lol: