TrapperXX
05-18-2013, 11:15 PM
My custom sizing die in .460 arrived today from Buckshot. Yeah!! Very nice. I was able to size, lube and instal gas checks on the bullets I have been casting. My first complete bullet....70978
After running it through the die my caliper showed it to be .460 exactly :D
I am using an old 450 lubesizer. I cleaned the old lube out and everything was moving right along until 15 bullets in....snap, Dang, I broke the linkage / handle. I was leaning into it to seat the gas checks.
70980
So, What do you guys recommend I do? I'd like to stay with equipment that will use the same sizing dies and top punches as the Lymans since I am now invested in that platform. Should I get a 4500?
help....:-(
After running it through the die my caliper showed it to be .460 exactly :D
I am using an old 450 lubesizer. I cleaned the old lube out and everything was moving right along until 15 bullets in....snap, Dang, I broke the linkage / handle. I was leaning into it to seat the gas checks.
70980
So, What do you guys recommend I do? I'd like to stay with equipment that will use the same sizing dies and top punches as the Lymans since I am now invested in that platform. Should I get a 4500?
help....:-(