View Full Version : need some help from the shot makers in here
deepdarkwaters
05-13-2013, 05:29 PM
Been working on a shot maker off and on for about a year I have went from #4 to about #7 trying for #9 right now I'm using old sewer pipe from all that I have read is pure lead will ww make smaller shot than pure I have hundreds of #s of lead pipe but maybe 100# of ww making 2 new test drippers to night one at .018 and .016 any info I would be very thiankful
heathydee
05-13-2013, 05:46 PM
Try a hole size of around .022 to .024" for #9 shot . Pure lead is all I use for shot but it is only used for skeet shooting .
Here is a link to another thread on the subject .
http://castboolits.gunloads.com/showthread.php?18389-Gonna-build-a-shot-maker
deepdarkwaters
05-13-2013, 07:34 PM
Thank you for the reply I a
m using MIG tips right now but I have someone machining a dripper like the littleton to see if I can get down to #9 if it works ill buy a set off ebay the MIG tip is a .023 my prototype has 7 drippers the other one has one dripper so I can experiment with
JeffinNZ
05-13-2013, 11:34 PM
My understanding is the dripper hole should be 1/3 the size of the desired shot.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.