Vihtavuori loads for cast bullets

[bigbear]

looking for any data from some one who actually loads with vihtavuori powders, especially 348Winchester,30-30, 300 savage, Thanks!

[6pt-sika]

I've used VV N-120 , N-130 and N-530 with cast bullets . However I tried all three in the 444 Marlin and one or two in the 45-70 . So sorry my experience is of no help to you .

[mainiac]

I use alot of v-133 in my cast levergun loads.I have a bunch of it left over from my old BR days. It works tremendously in the 375 win,,also 35 rem. Im hesatant to give any load data,because i had to go out on the limb,and make my own,because there not much load data for lever cartridges.

Basically, i treat it like H-322.There alot of data for that powder out there.

[Nobade]

I have shot a pile of 30-30 using VV N133. With 170gr. boolits, 25gr. is about tops before bore leading starts. No pressure problems at that point, but I get a grey bore after a while.

-Nobade