View Full Version : Looking for a Mold maker for RN rifle Bullet
hylander
05-02-2013, 01:13 PM
Seems most make a FN of atleast .180
Is there a maker that can make me a Mold similar to the LEE C312-185-1R
I love the bullet design just not the quality of the mold.
Calamity Jake
05-03-2013, 01:29 PM
Lyman 311291
375RUGER
05-03-2013, 01:41 PM
http://boomersmoulds.com/
frkelly74
05-03-2013, 02:24 PM
The newer design of the lee 2 cavity mold is not the same animal as the old ones with the alignment pins in the wrong way. You might give them a look if you can find one of the new ones.
hylander
05-03-2013, 02:41 PM
The newer design of the lee 2 cavity mold is not the same animal as the old ones with the alignment pins in the wrong way. You might give them a look if you can find one of the new ones.
I have one of the new ones, it is OK but drops undersized.
I did the sprue plate fix and lapped the first cavity, it now drops perfect from the first cavity.
However, I would like a quality custom mold
StrawHat
05-05-2013, 06:22 AM
I have one of the new ones, it is OK but drops undersized.
I did the sprue plate fix and lapped the first cavity, it now drops perfect from the first cavity.
However, I would like a quality custom mold
Sounds like you made one for yourself!
hylander
05-05-2013, 02:22 PM
Sounds like you made one for yourself!
Ya', but it is custom Redneck quality :lol:
I want one them new fangled Molds
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.