EDG
04-29-2013, 01:12 PM
Today was my first time to read in this forum.
I noticed one fo the guys using a drill bushing.
In my past life I worked a lot with tooling. Thought I would provide some names of tooling suppliers with drill bushings, dowel pins etc.
There are a wide array of drill bushing types that might be useful in swaging bullets. I have never swaged bullets but I have used them to swage case heads down.
If you are a good shopper and know their product lines you can often cook book most of a design
which reduces the cost and time to get it working.
Carr-Lane http://www.carrlane.com/
McMaster Carr http://www.mcmaster.com/
Reid Supply http://www.reidsupply.com/
Manhattan Supply aka MSC http://www.mscdirect.com/
Grainger http://www.grainger.com/Grainger/wwg/start.shtml
Then there are small parts suppliers that can supply shoulder bolts and dowel pins such as
Winfred Berg aka wmberg aka berg http://www.wmberg.com/
Small Parts Inc http://www.smallpartsinc.com/
Olander http://www.olandercorp.com/
Penn Engineering aka PEM http://www.pemnet.com/
PIC Design aka PIC http://www.pic-design.com/
I noticed one fo the guys using a drill bushing.
In my past life I worked a lot with tooling. Thought I would provide some names of tooling suppliers with drill bushings, dowel pins etc.
There are a wide array of drill bushing types that might be useful in swaging bullets. I have never swaged bullets but I have used them to swage case heads down.
If you are a good shopper and know their product lines you can often cook book most of a design
which reduces the cost and time to get it working.
Carr-Lane http://www.carrlane.com/
McMaster Carr http://www.mcmaster.com/
Reid Supply http://www.reidsupply.com/
Manhattan Supply aka MSC http://www.mscdirect.com/
Grainger http://www.grainger.com/Grainger/wwg/start.shtml
Then there are small parts suppliers that can supply shoulder bolts and dowel pins such as
Winfred Berg aka wmberg aka berg http://www.wmberg.com/
Small Parts Inc http://www.smallpartsinc.com/
Olander http://www.olandercorp.com/
Penn Engineering aka PEM http://www.pemnet.com/
PIC Design aka PIC http://www.pic-design.com/