PDA

View Full Version : 44-90



Hiwall55
04-28-2013, 12:08 AM
could someone please tell me what case it takes to make brass for a 44-90 Shiloh Sharps, thanks Bill

Don McDowell
04-28-2013, 12:29 AM
You can either buy them from Jamison, form them from the Huntington basic 44, or BACO sells reformed and stretched 348 win brass.

Nobade
04-28-2013, 10:13 AM
BACO also sells Jamison brand ones for a little less than you can order them from Jamison for. I just bought some for my rolling block, and they are very nice top quality cases. Just a little over $2 each so take care of them. They come in two different rim thicknesses so make sure you get the ones to fit a Shiloh.

-Nobade

bigted
04-28-2013, 12:43 PM
I bought the .079 inch rim thickness cases for cutting down for my 43 Spanish chamber but the thickness of my Bertram cases measure .085 thickness. these cases work well for filling my chamber but I have a bit of primer protrusion with these cases as well...about .010 inch which isn't too bad for this old roller im shooting them in. they be good cases otherwise and flawless as far as I can tell.

ohh and I got em from Baco as well.

Hiwall55
04-28-2013, 05:35 PM
Thanks All, Bill

Jim2
05-05-2013, 06:28 PM
Bill,

Now what you got up your sleeve? I hear them 44-90 make mighty fine tomatoe stakes :evil:.


Jim, over in MO

Hiwall55
05-08-2013, 02:06 PM
Jim I was thinking of a corner post to hang a gate,Bill