Lube Stick Mold

[lead_her_fly]

Ok, I did a search and couldn't find a thread on this so here goes.
I am experimenting with homebrew lube. I need to have a lube stick mold. I know I can pour it in the luber and wait for it to harden. What I want is a simple pipe/tubing thingy that someone else has already made. Any suggestions?

[imashooter2]

http://www.castboolits.gunloads.com/showpost.php?p=65262&postcount=14

[Halfbreed]

been doing it this way for years, except the lube remover is a 7/8" dowel rod screwed to the 2x8 just to push the lube sticks out with. I generally make about 20 sticks at a time.
John

[kodiak1]

Do the same thing but my rig is made with copper instead of plastic. Works well.
Ken.

[lar45]

If your lube gets stuck in the tubes, try putting it in the freezer for an hour.

[Gussy]

There's photos and directions on www.castingstuff.com go down to the lead smelter and lube making page.
gus