Rcbs *30-180-sp

[bdoyle]

I recently picked up this mould. I could not find the rcbs part number 82013. They also reference a lyman # of 311467. It came in a cardboard box. It's obviously not a '467 but it sure does have an odd lube groove configuration.

[EchoSixMike]

I used to have that mold, which I recently sold to another member of the BB.

Cast well and dropped about 187gns from WW. Used alot of them in 30-40 with 18gns of 2400. S/F....Ken M

[Dutch4122]

I just picked up a RCBS 30-180-SP mold last week. Yours appears to be a different design from what I have. Here's a link with a pic on the Midway site:

http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=112896

[sundog]

I have the RCBS 30-180-SP, and shoot it in an as issued Rem 03A3 for military bolt matches. It does a FINE job. Mine looks like the one Dutch made a reference to on the Midway site (above). sundog

[C1PNR]

I recently picked up this mould. I could not find the rcbs part number 82013. They also reference a lyman # of 311467. It came in a cardboard box. It's obviously not a '467 but it sure does have an odd lube groove configuration.
Just pulled out my 30-180 SP (RCBS # 82013) and it looks just exactly like your picture.

Haven't had it long and haven't cast any yet. Box says it uses the RCBS #540 Top Punch.

FWIW