ohland
04-02-2013, 05:39 PM
ARBOR RELOADING PRESS BSQUARE B-SQUARE BENCHREST SHOOTING TWO ARM TWIN POST
Not mine.
The B-Square arbor press that I have uses a longer top beam. If you look at the pics, the two threaded rods are spaced a little over half of the bottom base. My twin arbor has the studs farther apart. Suppose the closer spacing allows less "flex", though IMHO, the solid aluminum top cross-bar on mine is not going to flex much when I use an in-line seater....
Not mine.
The B-Square arbor press that I have uses a longer top beam. If you look at the pics, the two threaded rods are spaced a little over half of the bottom base. My twin arbor has the studs farther apart. Suppose the closer spacing allows less "flex", though IMHO, the solid aluminum top cross-bar on mine is not going to flex much when I use an in-line seater....