Muddydogs
03-31-2013, 07:13 PM
Here is a simple, easy and handy bullet brass tray I built for the front of my AP.
http://i90.photobucket.com/albums/k256/muddydogs/2013-03-31134027_zps8800d3b7.jpg
http://i90.photobucket.com/albums/k256/muddydogs/2013-03-31134100_zpsd8734a45.jpg
http://i90.photobucket.com/albums/k256/muddydogs/2013-03-31134123_zps32d3a3b5.jpg
All I used was an L bracket from the hardware store that is used in framing to secure 2 2x4's together. I added an extra 90 degree bend and screwed it to the bench. Don't mind the velcro and cardboard, My press works the grease out on the left side and I was always bumping my leg into it and getting grease on my pants so I made a grease guard.
For the blue bullet bin I cut a some of the channel off the back so it would hang past the 90 degree bend in the L bracket so that both bins would fit without interfering with the press handle. I also had to glue a block of wood to the back of the blue bin so it would rest on the L bracket and keep the bin level. Before the wood the bin hung front down and bullets tended to want to roll out.
http://i90.photobucket.com/albums/k256/muddydogs/2013-03-31134150_zps02486646.jpg
http://i90.photobucket.com/albums/k256/muddydogs/2013-03-31134027_zps8800d3b7.jpg
http://i90.photobucket.com/albums/k256/muddydogs/2013-03-31134100_zpsd8734a45.jpg
http://i90.photobucket.com/albums/k256/muddydogs/2013-03-31134123_zps32d3a3b5.jpg
All I used was an L bracket from the hardware store that is used in framing to secure 2 2x4's together. I added an extra 90 degree bend and screwed it to the bench. Don't mind the velcro and cardboard, My press works the grease out on the left side and I was always bumping my leg into it and getting grease on my pants so I made a grease guard.
For the blue bullet bin I cut a some of the channel off the back so it would hang past the 90 degree bend in the L bracket so that both bins would fit without interfering with the press handle. I also had to glue a block of wood to the back of the blue bin so it would rest on the L bracket and keep the bin level. Before the wood the bin hung front down and bullets tended to want to roll out.
http://i90.photobucket.com/albums/k256/muddydogs/2013-03-31134150_zps02486646.jpg