redneckdan
08-25-2007, 04:10 PM
The stock is still unfinished. The scope mount has been tweeked for windage but its still about 120 MOA tipped instead of the 25 MOA I was trying for. So its pretty much 14" high at 25yds with max scope adjustment downward. The barrel is a 24" wilson arms #7 profile.
http://i17.photobucket.com/albums/b77/redneckdan/IMGP2962.jpg
Chambered in .30-284 winchester.
http://i17.photobucket.com/albums/b77/redneckdan/IMGP2959.jpg
Heres a closer shot of the scope base system.
http://i17.photobucket.com/albums/b77/redneckdan/IMGP2985.jpg
The stock is glass bedded at the recoil lug, chamber area of the barrel, rear reciever tang, floor plate and the barrel channel is sealed.
http://i17.photobucket.com/albums/b77/redneckdan/IMGP2991.jpg
http://i17.photobucket.com/albums/b77/redneckdan/IMGP2962.jpg
Chambered in .30-284 winchester.
http://i17.photobucket.com/albums/b77/redneckdan/IMGP2959.jpg
Heres a closer shot of the scope base system.
http://i17.photobucket.com/albums/b77/redneckdan/IMGP2985.jpg
The stock is glass bedded at the recoil lug, chamber area of the barrel, rear reciever tang, floor plate and the barrel channel is sealed.
http://i17.photobucket.com/albums/b77/redneckdan/IMGP2991.jpg