Monotype/WW Trade Ratio?

[35 Whelen]

I have a fair amount of monotype and linotype for which I have no need. All of my casting is done with wheelweights. What would be a reasonable trade ratio of linotype to WW ingots or monotype to WW ingots?

35W

[runfiverun]

it depends on whom you are trading to...
you'd have to force 20 pounds of lino on me for a pound of ww alloy.
if I had 1500 pounds of pure i'd swap ww's for lino about 2/3-1

[bobthenailer]

My self i would hang on to it, at times you may find that you need some as WW alloy is being phased out for wheel weights on cars . i just ended up with about 400+ lbs of soft lead that neededs to be alloyed up in hardness to be used for cast bullets.
But if you have to trade! id say 1lb of linotype for 2 to 3 lbs of WW .
for 1 lb of Monotype for 3 to 4 lbs of WW.
Just my guess !