What do I have here?

[thekidd76]

I've posted a couple times for help identifying things that i've found in this reloading/casting/swaging collection I purchased, so this is another one. Any help or guidance would be greatly appreciated.

This is obviously a pistol barrel of some kind..any ideas?

64627
64628
64629

Based on the plastic bag this one is in from the Navy Arms Co. in New Jersey, I assume this is a replica sight for a rifle..which one?

64630

[John Allen]

The second one is just a vernier tang. It could be for a few different rifles you have to check the hole spacing to confirm. It has a standard eye cup on it. You look it in place by tightening down the eyecup.

[jhrosier]

The pistol barrel is for a CZ52.

Jack

[thekidd76]

Thanks John...that makes sense Jack, since also in this collection was a few hundred rounds of 7.62 x 25....thanks.

[John Allen]

Kidd, if you measure the center to center I can check on some of my guns to see if we can figure out what it will fit.

[thekidd76]

Center to center on the mount is exactly 1.5".