mstarling
03-13-2013, 12:29 AM
On a lark I bought a 8.5" CMMG 1:7 Wasp bbl and built an upper for my registered M16. Threaded end of the muzzle turned out to be inside the YHM handguard I used. Realized the 5/8x24 adapter for the Octane 9HD2 was not always staying in the can when it was removed, so had to wait until TROS did a run of 5/8x24 3 lug adapters.
Adapter is finally in and upper is a little longer but much better to mount and dismount the can.
With other things to do, haven't done much reloading for that length barrel ... I also have a 16" that has worked really well with 2400 and jacketed projectiles and the 247 NOE.
I do not have any AA1680 available.
Anyone have loading suggestions for this short a bbl with that boolit?
Adapter is finally in and upper is a little longer but much better to mount and dismount the can.
With other things to do, haven't done much reloading for that length barrel ... I also have a 16" that has worked really well with 2400 and jacketed projectiles and the 247 NOE.
I do not have any AA1680 available.
Anyone have loading suggestions for this short a bbl with that boolit?