Sizing dies for use in standard reloading presses?

[Naphtali]

Are sizing dies, that do not inject lubricant, available for reloading presses? I may be referring to [something like] Lee push-through sizing dies. Since I have never used one, never seen one in use, I cannot confirm this myself.

My intended purpose is to size bullets in a standard reloading press, then pan lube them. Bullet diameters would be .45- and .73-calibers.

[autopilotmp]

Yes the lee sizing does got in reg press. I use them with pan lube. Inexpensive and work well.

[MT Chambers]

They are avail. in limited sizes from lee or custom from some on here.

[theperfessor]

I sell a set that lets you use Lyman or RCBS dies for push through sizing in a regular press.

Here is a link to the second run sign up page for info.

http://castboolits.gunloads.com/showthread.php?158620-Sign-Up-List-for-Nose-First-Sizer-Kit-Part-2

[williamwaco]

If you already have sizing dies for a lubri-sizer, you need to contact the perfessor a member here.

http://castboolits.gunloads.com/member.php?4163-theperfessor

[bakrzdzn]

I've been looking to get a lee set, due to the cost factor, but what else can a noobie do? I would love to have a set of the perfessors tooling, but from what I see, I need a sizing die first. I'm sure there is a thread here somewhere...I didn't have time to find it.

Roy

[dromia]

I sell a set that lets you use Lyman or RCBS dies for push through sizing in a regular press.

Here is a link to the second run sign up page for info.

http://castboolits.gunloads.com/showthread.php?158620-Sign-Up-List-for-Nose-First-Sizer-Kit-Part-2

First class tool from the Perfessor, push throughs have their uses but with the Perfessors adaptor I am able to use my H&I dies as push throughs and free up shelf and bench space by getting rid of the push through only dies. http://img.photobucket.com/albums/1003/adamsutherland/Smilies%20FB/sSig_goodjob.gif