Interchangeable primer tubes

[salpal48]

I load mostly on single stage equipment , Lyman all american , CH, RCBS. I also Have 3 dillons. I noticed I can use my Dillon pick up tubes and Extra Dillon magazine tube in all my single stage presses. The fit and work in all Universal primer feed and Lyman Push button feed with no problem. This has increased the primer capacity to 100 primers per tube . Coupled with the use of a Vibra prime thats used mostly with dillon tubes It eliminates the standard pick up method. I do not have any Hornady Equipment,to try but assume it works there also.

This is just for information any my personal preference
Sal

[bear67]

I acquired a RCBS bench priming tool here last week and found that the Dillon tubes work fine in the RCBS. I have several of the Dillons. After your post above, I checked and they also fit my Lyman priming setup, which I very seldom use. The Dillons are .002 smaller than the RCBS tubes.
Thanks